Image 1 of 8
Image 2 of 8
Image 3 of 8
Image 4 of 8
Image 5 of 8
Image 6 of 8
Image 7 of 8
Image 8 of 8
1999 - 2007 Mazda B-Series 3 Button Keyless Entry Remote Fob - CWTWB1U331, CWTWB1U345, CWTWB1U212, GQ43VT11T
Step by Step How to Program Instructions:
Note: It is necessary to have all of your keyless remotes available prior to beginning this procedure. All keyless remotes not present during the programming procedure will not work when the programming procedure has been competed.
1. DO NOT depress brake pedal during this programming procedure.
2. Unlock all doors using the power door lock switch on door panel.
3. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time (the most common amount of ignition cycles) ending in RUN. Door locks will cycle to confirm programming mode. (Some times the amount of cycles is as little as 5 but other models may require 10. On some models you may need to keep the unlock button depressed as you cycle the ignition, only depressing the unlock button when the locks cycle).
4. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
5. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.
6. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.