1993 - 1997 Chrysler Concorde 3 Button Keyless Entry Remote Fob - GQ43VT7T

Method-1

1 find data link connector under steering column.

2 turn ignition on

3 ground pin 1 upper left most pin this is the programming line.

the door locks will lock then unlock.

4 press any key on the transmitter, locks will cycle to confirm

if you have a second transmitter press any button, wait for lock to cycle.

5 remove ground from pin 1

6 Done, test it out

Method-2

1. Remove the bezel to the right of the steering wheel that has an a/c vent and the traction control switch (or not) and unplug (or find) the traction control connector.

Place a jumper between pins 1 and 4 to place the receiver in teach mode.

Operate the power door lock button on the door and push the lock/unlock button on the fob. If you have 2 fobs, do the 2nd one as well.

2. Replace the connector and bezel.