2006 - 2009 Ram 2500-5500 3 Button Keyless Entry Remote Head Key - OHT692427AA - OHT692713AA

from $12.00

SKU: 1181

Condition:  Multiple Options

IMPORTANT: If your existing remote key has a screw on the back piece (also identifiable by the larger red panic button), this is NOT the correct item and you need the key with FCC ID: KOBDT04A.

Fits:

2006 - 2009 Ram 2500-5500

OEM Part Number:  05175786AB, 05175786AA, 05175817AA, 05179513AB, 5175786, 5175786AB, 56040649, 56040649AA, 56040649AC, 56040649AD, 56040669AC, 68001705AA, 68001705AB, 68003659AA

FCC ID:  OHT692427AA - OHT692713AA

Battery size: CR2032

Condition:

SKU: 1181

Condition:  Multiple Options

IMPORTANT: If your existing remote key has a screw on the back piece (also identifiable by the larger red panic button), this is NOT the correct item and you need the key with FCC ID: KOBDT04A.

Fits:

2006 - 2009 Ram 2500-5500

OEM Part Number:  05175786AB, 05175786AA, 05175817AA, 05179513AB, 5175786, 5175786AB, 56040649, 56040649AA, 56040649AC, 56040649AD, 56040669AC, 68001705AA, 68001705AB, 68003659AA

FCC ID:  OHT692427AA - OHT692713AA

Battery size: CR2032

Extended 2 Year Warranty
Extended 2 Year Warranty
$7.99
Button Cell Battery (Choose Your Size) Button Cell Battery (Choose Your Size) Button Cell Battery (Choose Your Size) Button Cell Battery (Choose Your Size) Button Cell Battery (Choose Your Size) Button Cell Battery (Choose Your Size) Button Cell Battery (Choose Your Size) Button Cell Battery (Choose Your Size)
Button Cell Battery (Choose Your Size)
from $5.00
Size:
3 Button Mopar Remote Head Key Silicon Cover - OHT692427AA - OHT692713AA 3 Button Mopar Remote Head Key Silicon Cover - OHT692427AA - OHT692713AA 3 Button Mopar Remote Head Key Silicon Cover - OHT692427AA - OHT692713AA
3 Button Mopar Remote Head Key Silicon Cover - OHT692427AA - OHT692713AA
$5.00 $12.00
Color:
Pre-Cut Key Service Pre-Cut Key Service Pre-Cut Key Service
Pre-Cut Key Service
from $5.00
Type:

Step by Step How to Programming Instructions:


If you have two programmed working keys use the following instructions to program an additional key.


Sentry Key Programming

You can program new keys to the system if you have two valid sentry keys by performing the following procedure:

 

1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch lock cylinder key code.

 

2. Insert the first valid key into the ignition switch and turn the ignition switch ON for at least 3 seconds but no longer than 15 seconds. Turn the ignition switch OFF and remove the first key.

 

3. Insert the second valid key and turn the ignition switch ON within 15 seconds. After ten seconds, a chime will sound and the Theft Alarm Light will begin to flash. Turn the ignition switch OFF and remove the second key.

 

4. Insert a blank Sentry Key into the ignition switch and turn the ignition switch ON within 60 seconds. After 10 seconds a single chime will sound. The Theft Alarm Light will stop flashing, turn on for 3 seconds; then turn off. The new Sentry Key has been programmed.


Repeat this procedure to program up to 8 keys. 

 

If you do not have two programmed keys available you will need to have an local auto locksmith program two keys for you.